Creative & Clever Ways to Hide Your Safe

how to hide a safeEveryone knows what a safe is for.  You don’t put just anything in a safe, you store your most valuable items. These valuable items might not only be of monetary value, rather items of great importance. This can include, titles, deeds, birth certificates, passports, and Social Security cards. Stuff you don’t want to land in the wrong hands.
 
Even though you own a safe which greatly increases the safety of these items doesn’t mean that your safe can’t be stolen or broken into. For this reason is why it’s smart to place your safe in a smart and concealed area.  Here are some helpful hints and ideas that will hopefully help you decide where to place yours.

     

  1. Inside a closet is a great spot to put a safe.  Typically a closet in the master bedroom or office. It’s most important that it’s not in an area of high foot traffic or visibility. You want to make sure the safe stays out of sight, which is why if you can hide it in a walk in closest behind some hanging clothes this will ensure it’s not easily found or transported.
  2.  

  3. Under the stairs. Most homes have that awkward half room, half closet space under the stairs. This is another secluded spot which can easily be concealed and forgotten. Sometimes these rooms can be setup with flush doors that look like a wall panel and are discernable to the naked eye.
  4.  

  5. Have an old fridge? Fridges can pretty easily be converted into a handy hiding spot. This can be used if you don’t have a super-secret room under the stairs and all you have a corner in your garage. Again, you don’t want the garage door being open and someone to drive by and spot your safe. This makes your house an easy target. Hiding your safe in the Fridge can disguise it in plain sight.
  6.  

  7. Building the safe into a wall can be a great option if you have the means to make it happen. This is ideal because the safe can be concealed completely behind the wall. If someone does happen to find where it’s at removing it becomes far more difficult and will require more tools and time by the thieves.
  8.  

  9. The easiest and least expensive route to hiding your safe is to use a cardboard moving box. This will help conceal it but doesn’t require too much protection outside of disguise.

 
Hopefully these tips will give you a better idea where to place your safe and what may or may not be a good idea.
 

Like what you read? Subscribe below!

iPosts RSS
iComments RSS

 

Advantages of a Floor Safe

floor safe

Commercial properties are subject to the same threats of burglary and vandalism as private properties. In certain areas, commercial properties are even more at risk because they are known to have money somewhere on the premises.

 

Owning a local brick and mortar business is high risk because it acts as an everyday cash machine, with money going in and out constantly. Because of this risk, commercial properties require high level amounts of security. A quality safe is one of these security precautions.

 

There are different types of safes, but the best choice for most businesses, is the floor safe. Floor safes are discrete because they are built into the construction of the office space. They are made specifically to the size and measurements which the floor can accommodate. Since the purpose of a floor safe is to be hidden, it must never extend past the level of the floor, which would defeat its overall purpose.

 

Most floor safes are built to have a lot of depth so they can securely hold many of the company’s valuables; money, documents, and other company assets. Normally a mat or remnant of carpet is placed on the floor over the safe’s opening to maintain security and discretion.

 

Floor safes, like most other safes, come with a secure locking system, a touchpad code or biometric reader. Another great advantage to installing a floor safe to protect your assets, is that when choosing a floor safe, you have the option of selecting a safe that can withstand the extreme temperatures of fire for at least thirty minutes, and one that can withstand flood water for the same amount of time.

 

Though floor safes can be fire-proofed and water-proofed to a certain extent, it is best that a commercial property have their own fire and flood alarms so that important items can be retrieved from the safe as soon as possible should a fire or flood occur.
 

Like what you read? Subscribe below!

iPosts RSS
iComments RSS

 

Reasons for a Floor Safe

The most popular type of safe for the home is a floor safe, because they can be bolted to the ground and they are quite heavy. Not many home invaders will take the time to break into a safe, and they are entirely too heavy to try to remove from the home. There is another type of floor safe, too, that can be installed beneath the floor. This adds and extra layer of protections, for the safe can be completely concealed by furniture or rugs, much the way a wall safe can be concealed by artwork.

Safes Are Only Effective When Used

When you take the time to install a wall safe or a floor safe in your home, like the LaGard FF-33, then you should be sure to use it. It may seem like you can put off dropping your important documents or valuable jewelry inside for a few days, but it just takes a moment for things to disappear. You might think that these things can never happen to you, but they can, and they won’t wait for you to drop your things into the safe first. Keep those valuables protected, and make use of your new safe!

A Floor Safe Is a Wise Decision

Studies show that most home invaders spend less than five minutes inside their target home. This means that anything you put inside a floor safe will likely remain safe, because it is not likely that any thief would take the time to crack the safe. In fact, floor safes are also easy to hide, as you can have them installed underneath the floor and cover them with rugs. It’s possible that it could go completely unnoticed. Investing in a LaGard FF-33 or a LaGard B2500 could be the wisest decision that you ever make.

Check Your Safe’s Specifications

Many people purchase a floor safe under the misguided notion that it will also protect the contents from a fire. The truth is that most safes that are built for security use materials that will cause the inside of a safe to reach soaring temperatures in the event of a house fire that reaches 1400 degrees Fahrenheit. You should be sure to specify when purchasing your safe, especially if you are seeking a safe that will protect valuable from both theft and fire. The safes are not created equally, and confusing one for the other could result in a devastating loss.

Security of Floor Safes

Not many home or business invaders are planning to spend more than a few minutes inside the target before getting out of Dodge. It is very likely that your wall or floor safe will go unnoticed by a thief. If he or she does notice the safe, the time it would take to enter the safe will discourage them from any attempt to remove the contents. Just by purchasing a LaGard FF-33 or a LaGard B2500, and making certain that you place any and all valuables inside, you could prevent the theft of your precious documents and jewelry. It’s definitely worth the investment.

Benefits of a Floor Safe

There are two types of floor safes: one that is bolted to the floor, and one that is installed beneath the floor. There are many advantages to both, though the in-floor safes sometimes do not meet fire-safe guidelines. Safes that are bolted to the floor are extremely heavy, which can me a huge deterrent to a thief. Of course, the ones that sit underneath the floor can often escape detection. A floor safe is an excellent choice if your walls are not thick enough to consider a wall safe. If installed correctly, even the in-floor safes can protect from fire and burglary.

Stack-On TDS Gun Safes

Stack-On makes an excellent line of gun safes called the TDS (Total Defense Select) line.  All of these gun safes feature UL rated locks, ETL tested fire protection up to 1400° F for 30 minutes and waterproof protection of up to 72 hours in 2 feet of water.  The TDS line also features plate steel construction and convertible interiors allowing for the storage of guns or valuables.  Gun racks are height adjustable to adjust to the length of your guns.  They also feature a handsome high gloss exterior finish and 5 spoke handles.

Locks are UL rated Type 1 electronic or Group 2 3-number combination dial.  They feature a re-locking mechanism which will keep the safes locked even if the lock is removed during a break-in attempt.  The locks are also protected by a hardened drill-resistant steel plate to protect against drilling attempts.

UL classified Gypsum wallboard and Palusol door seals are incorporated into these safes to provide fire and water protection.  They are laboratory tested to ensure compliance and are also California DOJ compliant.  The safes feature 7 large live locking bolts and 3 solid steel dead bolts on the hinge side to provide a total of 10 locking points.

These gun safes have a high-gloss protective finish with screen printing, which makes for an attractive appearance.  The patented gun barrel rests can be installed at different heights to allow for the different lengths of your guns, and the patented standoffs for scoped guns allow for scoped guns to stand upright in the safe without taking up extra space.  These gun safes also feature fully carpeted interiors with adjustable shelves which can be adjusted to meet your storage needs.

For more information on the Stack-On TDS line of safes, along with information on where to buy, visit the Value Safes website.

The Diamond Back gun safe is a quality gun safe available at a reasonable price

Diamond Back gun safes are a line of gun safes that combine quality with reasonable prices.  Diamond Back makes two series of gun safes, the “L” series and the “H” series.  The “L” series are designed to be tough and durable at a reasonable price.  They feature 9 1-inch solid steel bolts to secure the door.  They also carry a fireproof rating of 30 minutes at 350 degrees F internal temperature, and a solid 10 gauge steel body.

The “H” series features 10 1-1/2 in. steel locking bolts, a 3 gauge steel door that is double the thickness and twice the layers of fire liner, and a 10 gauge steel body.  They carry a 1-hour 350 degree internal temperature fire rating.  They also feature a drill resistant steel plate surrounding the locking mechansim and a semi-gloss finish that hides blemishes.  For more information on the Diamond back gun safe.