Construction of the TRTL-30×6 Series Jewelry Safes

TRTL-30x6 Jewelry Safes

TRTL-30x6 Jewelry Safes

We gave an overview of the TRTL-30×6 series of jewelry safes from Mutual Safes in a previous post.  This posts goes into the details of how these top of the line safes are constructed, and what sizes are available.

The TRTL-30×6 series uses a concrete material with inner and outer magnesium steel hardplates.  The concrete material contains nuggets and carbon fibers that increases its tensile strength and gives the material a density of 26,000 Psi.  The door frame and each individual bolt chamber is protected by reinforced armor plating to resist even the most determined attack.  Available locking mechanisms are UL listed Group 1 combination dial or electronic keypad.  Multiple relockers are synchronized to keep the safe locked in the event of an attack.

The TRTL-30×6 series is fireproof tested at 1750 degrees F for a period of 2 hours, without the temperature inside the safe rising above 350 degrees F.  The TRTL stands for “Torch and Tool Resistant”, and is a UL standard, one of the highest available.  These safes are available in 4 sizes — 30″ x 30″ x 32″, 43″ x 30″ x 32″, 67″ x 30″ x 32″, and 69″ x 44″ x 36″.  The safes weigh 2000, 2600, 3800 and 5500 lbs. respectively!  Value Safes carries these safes in like-new factory reconditioned versions which are priced at less than half the price of new units.  They can be seen at the following link:  TRTL-30×6 Series Jewelry Safes.

The TRTL-30×6 Series of Jewelry Safes from Mutual Safes

TRTL-30x6 Jewlry Safes

The TRTL-30×6 series of jewelry safes from Mutual Safes are some of the most secure jewelry safes manufactured.  You should only consider purchasing one if your insurance company requires it, or if you require protection from even the most determined attack.  These safes ARE the top of the line.  Each safe comes with a lifetime warranty from Mutual Safes against fire and attack.  If one of these units cannot be repaired after an attack or fire, it will be replaced with a new one by Mutual Safes.

The TRTL-30×6 series is constructed using a layer of concrete material sandwiched between inner and outer magnesium steel hardplates.  The concrete material incorporates a matrix of nuggets and carbon fiber which enhances its tensile strength.  The material has a density of 26,000 psi.  Reinforced armor plating is used to protect the door frame and each individaul bolt chamber, making the safe resistant to even the most sophisticated attack.  TRTL stands for “Tool and Torch Resistant”, and is a UL Standard, one of the highest available.  These safes are also fireproof, having been tested in a 1750 degree F fire for a period of 2 hours, without the temperature inside the safe rising above 350 degrees F.

The TRTL-30×6 series uses a multitude of relockers that are synchronized to ensure that the safe stays locked in the event of an attack.  Locking mechanisms available are UL listed Group 1 combination dial or electronic keypad.  The series is available in 4 sizes — 30″ x 30″ x 32″, 43″ x 30″ x 32″, 67″ x 30″ x 32″ and 69″ x 44″ x 36″.  The safes weigh 2000, 2600, 3800 and 5500 lbs. respectively!  The TRTL-30×6 series is available in like-new factory reconditioned versions, at about half the cost of new units.